Xiamen Ai Power Technology Co., Ltd.
Add to Cart
AI power SDEC series generator set adopts SDEC engine as the power source. Shanghai Diesel Engine Co., Ltd. (SDEC), with SAIC Motor Corporation Limited as its main shareholder, is a large state-owned high-tech enterprise engaged in research and development and manufacture of engines, engine parts, possessing a state-level technical center. Its former was Shanghai Diesel Engine Factory that was established in 1947 and was restructured into a stock-shared company in 1993 with shares of A and B.
SDEC Engine Specifications:
| GENERAL ENGINE DATA | ||||||||||||
| Engine manufacture | Shanghai Diesel Engine Co., Ltd. (SDEC) | |||||||||||
| Engine brand | SDEC | |||||||||||
| Engine model | SC7H250D2 | |||||||||||
| Engine speed (rpm) | 1500 | |||||||||||
| Engine output(kWm) | ||||||||||||
| Standby Power | 185 | |||||||||||
| Prime Power | 168 | |||||||||||
| Engine Type | 4-Cycle, In-line, 6-Cylinder Diesel, water cooled, Turbo charged | |||||||||||
| Bore x Stroke (mm) | 105*124 | |||||||||||
| Displacment (litre) | 6.44L | |||||||||||
| Compression Ratio | 16:1 | |||||||||||
| FUEL SYSTEM | ||||||||||||
| Injection pump | Longkou in-line “P” type | |||||||||||
| Governor | Electric type | |||||||||||
| Fuel Consumption (litre/hour) | ||||||||||||
| 25% load | 10.7 | |||||||||||
| 50% load | 19.9 | |||||||||||
| 75% load | 29.7 | |||||||||||
| 100% load | 39.7 | |||||||||||
| MECHANISM | ||||||||||||
| Type | Over head valve | |||||||||||
| Number of valve | Intake 2, exhaust 2 per cylinder | |||||||||||
| Valve lashes at cold | Intake 0.25mm, Exhaust 0.50mm | |||||||||||
| ENGINEERING DATA | ||||||||||||
| Heat rejection to coolant | 16.8 kcal/sec | |||||||||||
| Air flow | 8.1m3/min | |||||||||||
| Exhaust gas flow | 18.2m3/min | |||||||||||
| Exhaust gas temp. | 600 | |||||||||||
| COOLING SYSTEM | ||||||||||||
| Cooling method | Fresh water forced circulation | |||||||||||
| Coolant capacity | 9.6L | |||||||||||
| Thermostat | ||||||||||||
| Opening temp.°C | 82 | |||||||||||
| Full open temp.°C | 95 | |||||||||||
| Thermostat Type | Wax–pellet type | |||||||||||
| LUBRICATION SYSTEM | ||||||||||||
| Lub. Method | Fully forced pressure feed type | |||||||||||
| Oil pan capacity | Max. 17.5 liters , Min. 15 liters | |||||||||||
| Oil pump | Gear type driven by crankshaft | |||||||||||
| Oil filter | Full flow, cartridge type | |||||||||||
| Lub. Oil | Refer to Operation Manual | |||||||||||
| ELECTRICAL SYSTE | ||||||||||||
| Battery Charging Alternator | 28V×55A alternator | |||||||||||
| Starting motor | 24V×6kW | |||||||||||
| Battery Voltage | 24V | |||||||||||
| Battery Capacity | 150 Ah (recommended) | |||||||||||
Product Photos:
● Famous brand engine couple with high quality alternator
● Large size cooling radiator
● Heavy duty steel base frame
● Strong anti-vibration mat
● Standard free maintenance battery
● AC alternator for battery charger
● Heavy-duty air filter, oil filter, water filter
● Famous brand controller and breaker
● Optional fuel tank, silent canopy, ATS, synchronization panels.
A: It’s 1 year or 1000 running hours whichever comes first. But based on some special project, we can extend our warranty period.
A. Yes, we can accept OEM.
A: We can accept T/T 30% in advance and the balance 70% shall be paid before shipment or LC at sight.